Delphi Packard weatherpack connectors are a very popular sealed connector system in the automotive, off-road and mobile equipment industry
Delphi weather-pack connector bodies are locking nylon and sealed against moisture, dust and dirt
Weatherpack male terminals, female terminals and cable seals are secured into connector bodies with a hinge lock assembly
Cable seals must be used with mating terminals to create a weather-tight connection
Use the cavity plug for all pin locations not filled with terminals
The plug or tower half connector body comes with a self-lubricating silicone seal to reduce the engagement assembly force.
Weather-pack connectors have a wide temperature from -40 to 257 and can withstand high heat under-hood applications
Assembly Instructions
Apply the cable seal to your wire before stripping.
Alight the cable seal with wire insulation
Insert Weatherpack terminal in a crimping tool, then position the wire, seal in place
Crimp and visually inspect for good crimp before installing in connector body